north | North Protection
HPP Međuvršje

HPP Međuvršje

by | May 13, 2015 | Uncategorized

Projects GroupThermal Power Plants (TPP) Hydro Power Plants (HPP) Other Industry Sectors (OIS) System NEMO 2013 is a modular multi-channel system for simultaneous online monitoring and protection aggregates fromvibration, in accordance with: ISO 10816-1:1996 and ISO 10816-5:2000 for absolute bearing vibrations Group of ISO 7919 standards for relative shaft vibration. Manufacturer of the system is American company ProVibtech and within it, is provided the monitoring absolute vibration –vibration hydro-aggregates beds, and relative vibration – vibration back into the zone of hydro-aggregates beds. The system is installed in Hydropower plant “Međuvršje”. The number of channels from which to form a monitoring system is virtually unlimited and depends only on the projected needs. In this case set a 13 – channel system for the protection of hydro-aggregates bearings according to ISO 10816-5:2000 and platepackage in accordance with ISO 10816-1:1996 and recommendations HYDRO QUEBEC. In addition, the system allows you to connect to the SCADA system at the analog level. In accordance with the terms of reference next measurements are covered: absolute casing vibrations of upper carrier bearing in generator, from X and Y axes in the radial direction. absolute casing vibrations of carrier bearing in the axial direction. the relative vibrations of the shaft in the region of the upper guide bearing the X and Y axes in the radial direction. absolute casing vibrations of bottom carrier bearing in generator, from X and Y axes in the radial direction. the relative vibrations of the shaft in a carrier bearing of the lower zone of the X and Y axes in the radial direction. absolute casing vibrations of the turbine carrier bearing of the X...
Vlasinske HPP

Vlasinske HPP

by | May 13, 2015 | Uncategorized

Projects GroupThermal Power Plants (TPP) Hydro Power Plants (HPP) Other Industry Sectors (OIS) Addition of twenty two sensors, transmitters and associated production of cable installations through which the sensor signals are introduced into the electronic subsystem modules. By processing the sensor signal output solutions are available in two directions. In a domain to use a relay contact output with the activation of the signal for each of the sets of two-level warning and exclusion The second domain is available on the communication ports (RS 232, RS 485 and Ethernet) from which information about the signal state of the fifteen sensors assumes a superior system. System is installed in “Vlasinske” Hydro-power plant. In accordance with the terms of reference next measurements are covered: Sensor of relative vibrations, generator – X axis Sensor of relative vibrations, generator – Y axis Sensor of relative vibrations, turbine – X axis Sensor of relative vibrations, turbine – Y axis Sensor of relative shifts, generator shaft – axial direction Sensor of absolute vibrations, generator – X axis Speed of rotation sensor, generator – 1 imp/ob Sensor of absolute vibrations, generator – Y axis Sensor of absolute vibrations, turbine – X  axis Sensor of absolute vibrations, turbine – Y  axis Sensor of absolute vibrations, generator shaft – axial direction Sensor of absolute vibrations, stator plate 1 Sensor of absolute vibrations, stator plate 2 Sensor of absolute vibrations, stator plate 3 Sensor of absolute vibrations, stator plate 4...
Panonske HPP-HEP

Panonske HPP-HEP

by | May 13, 2015 | Uncategorized

Projects GroupThermal Power Plants (TPP) Hydro Power Plants (HPP) Other Industry Sectors (OIS) Mechanical measurements on turbo aggregate TA-2, it is expected to upgrade eighteen sensors and development of cable systems with all the elements with which the sensor signals are introduced into the system VM600, ie the SCADA system. System is installed in “Panonske” Thermal power plant – Heating plant. In accordance with the terms of reference next measurements are covered: Measuring the speed of rotation 1 Measuring the speed of rotation 2 (used for measuring range of the previous measurements with these to increase the resolution in the vicinity of the nominal speed (2800-3200 r / min) Measuring the expansion cylinder high pressure turbine Measuring the deflection of the rotor Measuring openness cylinder high pressure turbine Measuring the axial displacement of the intermediate pressure turbine zone 1 Measuring the axial displacement of the intermediate pressure turbine zone 2 Measuring the expansion cylinder, medium-pressure turbine Measuring openness cylinder low pressure turbine Measurement of the expansion cylinder of low pressure turbine The expansion of the turbine housing 1 The expansion of the turbine housing 2 Measuring the angle of the rotor turning   Disposition measurement of mechanical measurements on aggregate...