obsolete | North Protection
MSC-1015 Multi Signal Calibrator – OBSOLETE

MSC-1015 Multi Signal Calibrator – OBSOLETE

Description MSC-1015 is a battery operated instrument that is used to electronically simulate variety of outputs from various types of sensors. MSC-1015 uses a menu-driven 4×16 character LCD display to establish appropriate settings. The key panel contains five sealed switches marked with arrows, E (Enter), Back and ON/OFF. Power is supplied from 4 AA rechargeable, internally mounted Ni-MH batteries which can be recharged with a regulated 9Vdc source. Connection to PC is established over the front mounted LEMO connector. PC mode will be automatically started after inserting proper cable into device. Output signal is user selectable from: single-ended voltage (mV), single-ended charge (pC), differential charge (pC), current-sinking IEPE (ICP®), loop powered current source (mA), tachometer (TTL), flow (TTL), OSO® (Optical Speed Output) and BOV (Bias Output Voltage). Frequency range is 1Hz to 10kHz; RMS output voltage is from 10mV to 10V or 10pC to 10.000pC. Outputs can be provided in acceleration, velocity, displacement, voltage or charge. Application note Suitable for inspecting measurement lines according to ISO 10816 standards. Device is especially designed for Condition Monitoring Systems (CMS) and/or Vibration Monitoring Systems (VMS) that are independent or connect to SCADA Systems. Features Datasheet Software User Manual Specification Simulates various sensor signals Loop powered current source output Tachometer TTL and OSO® output BOV sensor test Menu-driven operation Multi language menu Metric and imperial units PC connection Battery operated MSC-1015 datasheet v1.3 – A4 MSC-1015_Software_v03 MSC-1015 User Manual Outputs Type Single-ended Voltage (mV) IEPE (ICP®) – Current Sinking Loop powered Current Source (mA) Single-ended Charge (pC) Differential Charge (pC) Tachometer (TTL) Flow Meter (TTL) OSO® – Optical Speed Output BOV – Bias...
MSS-1010 Multi-Sensor Simulator – OBSOLETE

MSS-1010 Multi-Sensor Simulator – OBSOLETE

Application note MSS – 1010  is a battery operated instrument that is used to electronically simulate variety of outputs from various types of accelerometers. MSS-1010 uses a menu-driven 4×16 character LCD display to establish appropriate settings. The key panel contains five sealed switches marked with arrows, E (Enter), Back and ON/OFF. Power is supplied by 4AA internally mounted rechargeable Ni-MH batteries, which can be recharged with a regulated 9Vdc source. Connection to PC is established over the front mounted LEMO connector. PC mode will be automatically started after inserting proper cable into device. Output  signal  is  user  selectable  from: single-ended  napon  (mV),  single-ended ®charge (pC), differental charge (pC), current-sinking IEPE (ICP), tachometer (TTL), ®flow (TTL), OSO  (Optical Speed Output) and BOV (Bias Output Voltage). Frequency range is 1Hz to 1kHz; output voltage RMS is from 10mV to 10V or 10pC to 10.000pC. Outputs can be provided in acceleration, velocity, displacement, voltage or charge. Application note Suitable for inspecting measurement lines according to ISO 10816 standards. Device is especially designed for Condition Monitoring  Systems  (CMS)  and/or  Vibration  Monitoring Systems (VMS) that connect to SCADA Systems.     Features Datasheet Software User Manual Specification Simulates accelerometer signals Tachometer TTL and OSO®  output BOV sensor test Menu-driven operation Multi language menu Metric and imperial units PC connection Battery operated MSS-1010 DT v02 – MSS-1010 UM v03 Outputs Type: Single-ended voltage (mV) IEPE (ICP®) – current sinking Single-ended charge (pC) Differential charge (pC) Tachometer (TTL) Flow meter (TTL) OSO®  – Optical Speed Output BOV – Bias Output Voltage Signals generator Frequency range: 1Hz – 1kHz, accuracy ±1% Amplitude:  Adjustable up to 10 000mV...