by Admin | Aug 8, 2018 | Calibration Instruments, Our Instruments, Sensor Simulators
Description MSC-1020 is a battery operated instrument that is used to electronically simulate variety of outputs from various types of sensors. MSC-1020 uses a menu-driven 4×16 character LCD display to establish appropriate settings. The key panel contains five sealed switches marked with arrows, E (Enter), Back and ON/OFF. Power is supplied from 4 AA rechargeable, internally mounted Ni-MH batteries which can be recharged with a regulated 9Vdc source. Connection to PC is established over the front mounted LEMO connector. PC mode will be automatically started after inserting proper cable into device. Output signal is user selectable from: single-ended voltage (mV), single-ended charge (pC), differential charge (pC), current-sinking IEPE (ICP®), loop powered current source (mA), tachometer (TTL), flow (TTL), OSO® (Optical Speed Output) and BOV (Bias Output Voltage). Frequency range is 1Hz to 10kHz; RMS output voltage is from 10mV to 10V or 10pC to 10.000pC. Outputs can be provided in acceleration, velocity, displacement, voltage or charge. Application note Suitable for inspecting measurement lines according to ISO 10816 standards. Device is especially designed for Condition Monitoring Systems (CMS) and/or Vibration Monitoring Systems (VMS) that are independent or connect to SCADA Systems. Features Datasheet Software User Manual Specification Simulates various sensor signals Loop powered current source output Tachometer TTL and OSO® output BOV sensor test Menu-driven operation Multi language menu Metric and imperial units PC connection Battery operated MSC-1020 datasheet v1.0 – A4 – MSC-1020P datasheet v1.0 – A4 Outputs Type Single-ended Voltage (mV) IEPE (ICP®) – Current Sinking Loop powered Current Source (mA) Single-ended Charge (pC) Differential Charge (pC) Tachometer (TTL) Flow Meter (TTL) OSO® – Optical Speed...
